Post Reply
Matt
Posts: 12
Joined: Thu Dec 30, 2004 12:43 pm
Location: London, UK
Contact:

"Allow empty channel feeds" options gone walkabout

Post by Matt » Mon Jan 10, 2005 1:08 pm

I've got a feed that fairly regularly returns no feed items - its a job feed, and it only lists each job once.

So, if there's no jobs posted for a while, I get to the point where the channel goes into error mode, and only updates every 6 hours (or whatever).

Looking at the help, there was an option in 2.0 that said "Allow empty channel feeds", but it seems to be missing in 2.05.

Any suggestions?

Thanks
Matt

User avatar
support
Site Admin
Posts: 3029
Joined: Fri Feb 07, 2003 12:48 pm
Location: Melbourne, Australia
Contact:

Re: "Allow empty channel feeds" options gone walka

Post by support » Tue Jan 11, 2005 12:14 am

Matt wrote:Looking at the help, there was an option in 2.0 that said "Allow empty channel feeds", but it seems to be missing in 2.05.


This option is still around but is not in the UI anymore (to remove clutter). Exit Awasu, find the channel's config file in the Channels sub-directory and open it in Notepad. Find the line that says "AllowEmptyFeeds=0" and change it to "AllowEmptyFeeds=1". You may also need to do this in CONFIG.INI as well.

The default behaviour is to now allow empty feeds - the original reason for this switch is no longer around, hence it was removed from the UI to reduce clutter.

Post Reply

Return to “Awasu - Bug Reports”