My intenet connection went down several times.
Therefore several Channels got multiple errors when updating.
These Channels are still red (after re-starting Awasu and the internet connection is working)
Questions:
1) How can I force Awasu to check for upates on these Red X Channels?
(I tried Tools/Update Channels but Awasu does not update these Red X Channels - The Channels are up because I can browse the RSS via IE)
2) Can I modify/tweak Awasu to NEVER throttle down the check frequency of channel check? (I don't want to wait the 6 hour default interval)
Thanks
Vid
- support
- Site Admin
- Posts: 3065
- Joined: Fri Feb 07, 2003 12:48 pm
- Location: Melbourne, Australia
- Contact:
Re: Channel Red X - Override?
vidconf wrote:1) How can I force Awasu to check for upates on these Red X Channels?
If you manually update a <i>single</i> channel (e.g. right-click on it in My Channels and choose <i>Update now</i>, or press Control-U), it will update, even if it's in "error mode" (i.e. had too many consecutive update errors). <i>Tools|Update all channels</i> will skip channels in error mode but you can override this by holding down the SHIFT key when selecting the menu item.
vidconf wrote:2) Can I modify/tweak Awasu to NEVER throttle down the check frequency of channel check? (I don't want to wait the 6 hour default interval)
Using the SHIFT key workaround described above, it's not really necessary.
Re: Channel Red X - Override?
Thanks,
The Shift/Update all channels worked.
Can I change the default 6 hour interval? (when a channel is down for several consecutive failed updates)
I'm running a fully automated Awsasu implementation with auto generation of channel reports on pre-defined schedule. If the Internet connection goes down I need Awasu to continue to try to update channels
and not wait 6 hours.
Vid
The Shift/Update all channels worked.
Can I change the default 6 hour interval? (when a channel is down for several consecutive failed updates)
I'm running a fully automated Awsasu implementation with auto generation of channel reports on pre-defined schedule. If the Internet connection goes down I need Awasu to continue to try to update channels
and not wait 6 hours.
Vid
- support
- Site Admin
- Posts: 3065
- Joined: Fri Feb 07, 2003 12:48 pm
- Location: Melbourne, Australia
- Contact:
Re: Channel Red X - Override?
vidconf wrote:Can I change the default 6 hour interval?
This setting is not configurable, although I'll change that for the next release.
I sent you an email before about this stuff, did you get it?
Re: Channel Red X - Override?
support wrote:vidconf wrote:Can I change the default 6 hour interval?
This setting is not configurable, although I'll change that for the next release.
I sent you an email before about this stuff, did you get it?
Got your email.
Thank You

Vid